Industrial Maintenance Technology
Industrial Maintenance Track
An understanding of the requirements and opportunities in maintenance, good safety practices, pride in workmanship, and an understanding of the principles and accepted practices of the maintenance trade are covered in this program. Students are trained to hold positions in factories, hospitals, hotels, etc., where multi-skilled maintenance personnel are needed. Included are courses in air conditioning, carpentry, electricity, machine tool, metal fabrication, and welding.
Progression in the Industrial Maintenance Track is contingent upon achievement of a grade of “C” or better in each technical course and maintenance of a 2.0 cumulative grade point average or better (on a 4.0 scale). The diploma and certificates within the Industrial Maintenance Track require a “C” or better in each technical course and maintenance of a 2.0 cumulative grade point average or better (on a 4.0 scale).
Advanced Manufacturing Technician Track
Advanced Manufacturing requires demonstrating multiple skills and competencies. Students accepted into this program gain valuable workplace experience, working three (3) days in a manufacturing environment and two (2) days on campus in a manufacturing-based classroom. Critical conceptual components of the track include embedded Safety Culture, Workplace Organization (5S), Lean Manufacturing, Problem Solving and Maintenance Reliability, coupled with Personal Behavior development (Attendance, Communication, Diligence, Teamwork, Initiative, and Interpersonal Relations) within the program pathway. Successful students apply learned skills throughout the program in the campus classroom, campus laboratory and manufacturing workplace. The advanced manufacturing technician (AMT) track develops multiple skills within the industrial maintenance pathway for manufacturing employers.
Progression in the Advanced Manufacturing Technician Track is contingent upon achievement of a grade “C” or better in all courses and maintenance of a 2.0 cumulative grade point average or better (on a 4.0 scale). The diploma and certificates within the Advanced Manufacturing Track require a “C” or better in all courses and maintenance of a 2.0 cumulative grade point average or better (on a 4.0 scale).
AMTEC Track
This program affords students the opportunity to achieve an understanding of the advanced skills needed to obtain a successful career in a constantly changing and globally competitive workforce. Students are trained in the multi-skilled maintenance trade with an emphasis on those skills needed in automotive industrial facilities.
Progression in the Automotive Manufacturing Technical Education Collaborative (AMTEC) Track is contingent upon achievement of a grade of “C” or better in each technical course and maintenance of a 2.0 cumulative grade point average or better (on a 4.0 scale). The diploma and certificates within the Automotive Manufacturing Technical Education Collaborative (AMTEC) track require a “C” or better in each technical course and maintenance of a 2.0 cumulative grade point average or better (on a 4.0 scale).
Advanced Manufacturing Tool and Die Technician Track
The Advanced Manufacturing Tool and Die Technician Track is a program designed to provide a student with a well-rounded skill set that is needed to obtain a career in the advanced manufacturing industry sector. This apprenticeship-style program provides the students the opportunity to work in an advanced manufacturing environment and learn in an advanced manufacturing-based classroom setting. Graduates from this program will have been introduced to critical maintenance skills, positive safety practices, and manufacturing core exercises with an emphasis on the knowledge needed to gain employment in the presswork and die maintenance field.
Progression in the Advanced Manufacturing Tool and Die Technician Track is contingent upon achievement of a grade of “C” or better in all courses and maintenance of a 2.0 cumulative grade point average or better (on a 4.0 scale). The diploma and certificates within the Advanced Manufacturing Track require a “C” or better in all courses and maintenance of a 2.0 cumulative grade point average or better (on a 4.0 scale).
Note: Hours Exception (62-71 for the A.A.S) approved by the KCTCS Board of Regents in December 2014.
Degrees
Diplomas
Certificates
- Chemical Operator - Certificate
- Controls and Automation Technician - Certificate
- Electro-hydraulic Technician - Certificate
- Fluid Power Mechanic - Certificate
- Industrial Maintenance Electrical Mechanic - Certificate
- Industrial Maintenance Machinists Mechanic - Certificate
- Industrial Maintenance Mechanic Level I - Certificate
- Industrial Maintenance Mechanic Level II - Certificate
- Industrial Maintenance Robotics Technician - Certificate
- Presswork and Die Maintenance Technician Level I - Certificate
- Presswork and Die Maintenance Technician Level II - Certificate
Approved Technical Electives List
| Course | Title | Credits |
|---|---|---|
| ACR 100 | Refrigeration Fundamentals | 3 |
| ACR 101 | Refrigeration Fundamentals Lab | 2 |
| ACR 102 | HVAC Electricity | 3 |
| ACR 103 | HVAC Electricity Lab | 2 |
| ACR 112 | Sheet Metal Fabrication | 3 |
| ACR 113 | Sheet Metal Fabrication Lab | 2 |
| ACR 130 | Electrical Components | 3 |
| ACR 131 | Electrical Components Lab | 2 |
| ACR 170 | Heat Load/Duct Design | 3 |
| ACR 200 | Commercial Refrigeration | 3 |
| ACR 201 | Commercial Refrigeration Lab | 2 |
| ACR 206 | Boilers | 5 |
| ACR 207 | Commercial HVAC Systems | 5 |
| ACR 208 | Chillers | 4 |
| ACR 209 | Manual N Commercial Load Calculation and Design | 4 |
| ACR 210 | Ice Machines | 3 |
| ACR 250 | Cooling and Dehumidification | 3 |
| ACR 251 | Cooling and Dehumidification Lab | 2 |
| ACR 260 | Heating and Humidification | 3 |
| ACR 262 | Heating and Humidification Lab | 2 |
| ACR 270 | Heat Pump Application | 3 |
| ACR 271 | Heat Pump Application Lab | 2 |
| ACR 290 | Journeyman Preparation | 3 |
| AIT 130 | Measurement and Instrumentation | 4 |
| AIT 140 | Industrial Controls I | 4 |
| AIT 150 | Industrial Controls II | 4 |
| AIT 160 | Workplace Safety | 1 |
| AIT 200 | Process Management and Quality Control | 4 |
| BRX 110 | Basic Blueprint Reading for Machinist | 2 |
| BRX 112 | Blueprint Reading for Machinist | 4 |
| BRX 120 | Basic Blueprint Reading | 3 |
| BRX 210 | Mechanical Blueprint Reading | 2 |
| CAD 100 | Introduction to Computer Aided Design 1 | 3 |
| CAD 112 | Engineering Graphics | 4 |
| CAD 120 | Introduction to Architecture | 4 |
| CAD 150 | Programming in CAD | 4 |
| CAD 200 | Intermediate Computer Aided Drafting | 4 |
| CAD 201 | Parametric Modeling | 4 |
| CAD 212 | Industrial Drafting Processes | 4 |
| CAD 216 | Building Information Modeling | 4 |
| CAD 220 | Architectural Design | 4 |
| CAD 222 | Mechanical Design | 4 |
| CAD 230 | Construction Techniques | 4 |
| CAD 240 | Advanced Dimensioning and Measurement | 4 |
| CAD 292 | Industrial Applications | 4 |
| CMM 110 | Fundamentals of Machine Tools - A | 3 |
| CMM 112 | Fundamentals of Machine Tools - B | 3 |
| CMM 114 | Fundamentals of Machine Tools | 6 |
| CMM 118 | Metrology/Control Charts | 2 |
| CMM 120 | Applied Machining I | 3 |
| CMM 122 | Applied Machining II | 3 |
| CMM 124 | Applied Machining | 6 |
| CMM 130 | Manual Programming | 3 |
| CMM 132 | CAD/CAM/CNC | 3 |
| CMM 134 | Manual Programming CAD/CAM/CNC | 6 |
| CMM 138 | Intro. to Programming & CNC Machines | 6 |
| CMM 150 | Shop Theory | 2 |
| CMM 151 | Machinery's Handbook and Metallurgy | 3 |
| CMM 152 | Jigs, Fixtures and Gaging | 3 |
| CMM 153 | Mold Theory | 3 |
| CMM 154 | Die Theory | 3 |
| CMM 210 | Industrial Machining I | 3 |
| CMM 212 | Industrial Machining II | 3 |
| CMM 214 | Industrial Machining | 6 |
| CMM 218 | Advanced Machining Techniques for Manufacturing | 8 |
| CMM 220 | Advanced Industrial Machining I | 4 |
| CMM 222 | Advanced Industrial Machining II | 2 |
| CMM 224 | Advanced Industrial Machining | 6 |
| CMM 230 | Conversational Programming | 6 |
| CMM 234 | CNC Machines & Coding Practices | 6 |
| CMM 240 | Introduction to 3-D Programming | 6 |
| CMM 244 | Advance Programming/Setup Practices | 6 |
| CMM 298 | Practicum | 1 |
| COE 199 | Cooperative Education: (Topic) | 1-8 |
| DPT 100 | Introduction to 3D Printing Technology | 3 |
| DPT 102 | 3D Printing Technology Fundamentals | 2 |
| DPT 150 | Introduction to Engineering Mechanics for 3D Printing | 3 |
| DPT 280 | Special Projects for 3D Printing, Level I | 1 |
| EET 100 | Electrical Safety in the Workplace | 3 |
| EET 110 | Voice & Data Installer Level I | 4 |
| EET 116 | Fiber Optics Systems | 3 |
| EET 119 | Basic Electricity | 5 |
| EET 127 | Electrical Technology Capstone | 1 |
| EET 148 | 3 | |
| EET 150 | Transformers | 2 |
| EET 151 | Transformers Lab | 1 |
| EET 154 | Electrical Construction I | 2 |
| EET 155 | Electrical Construction I Lab | 2 |
| EET 200 | Robotic Systems I | 2 |
| EET 201 | Robotic Systems II | 2 |
| EET 202 | Robotic Maintenance | 2 |
| EET 203 | Robotic Vision Systems | 2 |
| EET 250 | National Electrical Code | 4 |
| EET 252 | Electrical Construction II | 2 |
| EET 253 | Electrical Construction II Lab | 2 |
| EET 254 | Electrical Construction | 3 |
| EET 255 | Electrical Construction Lab | 4 |
| EET 264 | Rotating Machinery | 2 |
| EET 265 | Rotating Machinery Lab | 2 |
| EET 266 | Rotating Machinery and Transformers | 3 |
| EET 267 | Rotating Machinery and Transformers Lab | 3 |
| EET 268 | Rotating Machinery Electrical Motor Controls I | 3 |
| EET 269 | Rotating Machinery and Motor Controls I Lab | 4 |
| EET 270 | Electrical Motor Controls I | 2 |
| EET 271 | Electrical Motor Controls I Lab | 2 |
| EET 272 | Electrical Motor Controls II | 2 |
| EET 273 | Electrical Motor Controls II Lab | 2 |
| EET 274 | Electrical Motor Controls | 3 |
| EET 275 | Electrical Motor Controls Lab | 4 |
| EET 276 | Programmable Logic Controllers | 2 |
| EET 277 | Programmable Logic Controllers Lab | 2 |
| EET 280 | Multi-Platform Programmable Logic Controllers | 4 |
| EET 281 | Special Problems I | 1 |
| EET 283 | Special Problems II | 2 |
| EET 285 | Special Problems III | 3 |
| EET 286 | Programmable Logic Controllers II | 2 |
| EET 287 | Programmable Logic Controllers II Lab | 2 |
| EET 290 | Troubleshooting Industrial Controls and Motors | 4 |
| EET 295 | Alternative Energy Photovoltaic and Wind Electrical Generations Systems | 4 |
| ELT 102 | Blueprint Reading | 2 |
| ELT 103 | Introduction to Engineering | 3 |
| ELT 106 | 2 | |
| ELT 110 | Circuits I | 5 |
| ELT 114 | Circuits II | 5 |
| ELT 118 | 3 | |
| ELT 120 | Digital I | 3 |
| ELT 122 | Mechanical Power Transmission Systems | 3 |
| ELT 124 | Mechanical Power Transmission Systems Lab | 1 |
| ELT 201 | Statics and Strength of Materials | 4 |
| ELT 210 | Devices I | 4 |
| ELT 214 | Devices II | 4 |
| ELT 220 | Digital II | 3 |
| ELT 222 | Mechanics of Telephony | 3 |
| ELT 224 | Basic Telecommunications Installation and Maintenance | 3 |
| ELT 232 | Computer Software Maintenance | 3 |
| ELT 234 | Computer Hardware Maintenance | 3 |
| ELT 240 | Communications Electronics | 6 |
| ELT 244 | Electrical Machinery and Controls | 4 |
| ELT 250 | Programmable Logic Controllers | 4 |
| ELT 260 | Robotic and Industrial Automation | 5 |
| ELT 261 | 3 | |
| ELT 264 | 4 | |
| ELT 265 | Applied Fluid Power | 3 |
| ELT 289 | Engineering and Electronics Technology Capstone | 1 |
| FPX 100 | Fluid Power | 3 |
| FPX 101 | Fluid Power Lab | 2 |
| IET 104 | Blueprint Reading/Schematics | 2 |
| IET 111 | Lean Safety Culture | 1 |
| IET 112 | Lean Manufacturing Concepts -TPS | 1 |
| IET 113 | Lean 5S Methodology | 1 |
| IET 114 | Lean Problem Solving Methodology | 1 |
| IET 115 | Lean Machine Reliability | 1 |
| IMT 100 | Welding for Maintenance | 3 |
| IMT 101 | Welding for Maintenance Lab | 2 |
| IMT 110 | Industrial Maintenance Electrical Principles | 3 |
| IMT 111 | Industrial Maintenance Electrical Principles Lab | 2 |
| IMT 115 | Maintenance Machining I | 2 |
| IMT 116 | Maintenance Machining I Lab | 5 |
| IMT 120 | Industrial Maintenance Rotating Machinery | 3 |
| IMT 121 | Industrial Maintenance Rotating Machinery Lab | 2 |
| IMT 138 | Lean Manufacturing | 5 |
| IMT 1381 | Safety Culture | 1 |
| IMT 1382 | 5S | 1 |
| IMT 1383 | Total Production Management | 1 |
| IMT 1384 | Problem Solving | 1 |
| IMT 1385 | Maintenance Reliability | 1 |
| IMT 140 | Industrial Mechanics | 3 |
| IMT 141 | Industrial Mechanics Lab | 1 |
| IMT 150 | Maintaining Industrial Equipment I | 3 |
| IMT 151 | Maintaining Industrial Equipment I Lab | 2 |
| IMT 160 | FANUC Robot Operations | 2 |
| IMT 161 | KUKA Robot Level 1 Robot Operation | 2 |
| IMT 162 | YASKAWA/MOTOMAN Robot Operations | 2 |
| IMT 198 | Practicum | 1-8 |
| IMT 199 | Cooperative Education | 1-8 |
| IMT 200 | Industrial Robotics and Robotic Maintenance | 4 |
| IMT 220 | Industrial Maintenance Electrical Motor Controls I | 3 |
| IMT 221 | Industrial Maintenance Electrical Motor Controls I Lab | 2 |
| IMT 222 | Industrial Maintenance Motor Controls II | 2 |
| IMT 223 | Industrial Maintenance Motor Controls II Lab | 2 |
| IMT 230 | Industrial Maintenance of PLCs | 5 |
| IMT 231 | Industrial Maintenance of PLC's Lab | 2 |
| IMT 240 | Industrial Maintenance Motor Control Concepts | 6 |
| IMT 241 | Industrial Maintenance Motor Control Concepts Lab | 4 |
| IMT 250 | Maintaining Industrial Equipment II | 2 |
| IMT 251 | Maintaining Industrial Equipment II Lab | 3 |
| IMT 260 | Presswork and Die Maintenance | 7 |
| IMT 280 | Advanced Programmable Logic Controllers | 3 |
| IMT 281 | Advanced Programmable Logic Controllers Lab | 2 |
| IMT 282 | PLC Programming Languages | 3 |
| IMT 289 | Industrial Maintenance Technology Capstone | 1 |
| IMT 290 | Special Problems | 1 |
| ISM 102 | Fundamentals of Instrumentation | 4 |
| ISM 210 | Fundamentals of Process Control | 4 |
| ISX 100 | Industrial Safety | 3 |
| ISX 101 | Introduction to Industrial Safety | 3 |
| ISX 105 | 2 | |
| MFG 265 | Robotics and Industrial Automation | 4 |
| MST 200 | Advanced Hydraulic Systems | 3 |
| MST 201 | Advanced Hydraulic Systems Lab | 2 |
| MST 204 | Advanced Pneumatic Systems | 3 |
| MST 205 | Advanced Pneumatic Systems Lab | 2 |
| MST 206 | Electrohydraulics | 3 |
| MST 207 | Electrohydraulics Lab | 2 |
| PLB 150 | Plumbing, Introduction to the Trade | 3 |
| PLB 151 | Basic Plumbing Skills | 3 |
| PHS 175 | Applied Physics | 6 |
| PHX 150 | Introductory Physics | 3 |
| PMX 100 | Precision Measurement | 3 |
| WLD 100 | Oxy-Fuel Systems | 2 |
| WLD 101 | Oxy-Fuel Systems Lab | 2 |
| WLD 110 | Cutting Processes | 2 |
| WLD 111 | Cutting Processes Lab | 3 |
| WLD 120 | Shielded Metal Arc Welding | 2 |
| WLD 121 | Shielded Metal Arc Welding Fillet Lab | 3 |
| WLD 123 | Shielded Metal Arc Welding Groove with Backing Lab | 3 |
| WLD 130 | Gas Tungsten Arc Welding | 2 |
| WLD 131 | Gas Tungsten Arc Welding Fillet Lab | 3 |
| WLD 133 | Gas Tungsten Arc Welding Groove Lab | 3 |
| WLD 140 | Gas Metal Arc Welding | 2 |
| WLD 141 | Gas Metal Arc Welding Fillet Lab | 3 |
| WLD 143 | Gas Metal Arc Welding Groove Lab | 3 |
| WLD 145 | Gas Metal Arc Welding Aluminum Lab | 1 |
| WLD 147 | Flux Cored Arc Welding Lab | 1 |
| WLD 151 | Basic Welding A | 2 |
| WLD 152 | Basic Welding B | 5 |
| WLD 161 | Submerged Arc Welding Lab | 1 |
| WLD 170 | Blueprint Reading for Welding | 2 |
| WLD 171 | Blueprint Reading for Welding Lab | 3 |
| WLD 181 | Advanced Welding Systems Lab | 1 |
| WLD 198 | Special Topics in Welding | 1-6 |
| WLD 220 | Welding Certification | 2 |
| WLD 221 | Welding Certification Lab | 3 |
| WLD 225 | Shielded Metal Arc Welding Open Groove Lab | 3 |
| WLD 227 | Shielded Metal Arc Welding Pipe Lab A | 3 |
| WLD 229 | Shielded Metal Arc Welding Pipe Lab B | 3 |
| WLD 235 | Gas Tungsten Arc Welding Pipe Lab A | 3 |
| WLD 237 | Gas Tungsten Arc Welding Pipe Lab B | 3 |
| WLD 239 | Orbital Tube Welding | 1 |
| WLD 245 | Gas Metal Arc Welding Pipe Lab A | 3 |
| WLD 247 | Gas Metal Arc Welding Pipe Lab B | 3 |
| WLD 251 | Welding Automation Lab | 1-6 |
| WLD 253 | Pipe Fitting and Template Development Lab | 1 |
| WLD 298 | Welding Practicum | 1-6 |
| WPP 200 | Workplace Principles | 3 |